Black & Company | Industrial & Safety Supplies

HomeAdhesives, Sealants & TapesAdhesives & SealantsEpoxy Bond

Epoxy Bond

Sort By:

Select products then

Showing products 97 to 171 of 171

Show Products Per Page

<< Prev Page of 2

List Grid

Filter Products

Clear

Type

1-Part, General Purpose (2)

1-Part, General Purpose, High Performance (1)

1-Part, General Purpose, Ultra Fast Cure (1)

1-Part, High Strength (1)

1-Part, Repositionable (1)

2-Component (2)

2-Component Fast Bond (1)

2-Part (8)

2-Part, Fast Cure (2)

2-Part, General Purpose (2)

2-Part, General Purpose, High Performance (4)

2-Part, General Purpose, High Strength (1)

2-Part, General Purpose, High Viscosity (1)

2-Part, General Purpose, Ultra Fast Cure (2)

2-Part, High Performance (9)

2-Part, High Performance, Fast Cure (1)

2-Part, High Performance, Non-Sag (2)

2-Part, High Performance, Ultra Fast Cure (1)

2-Part, High Strength, Non-Sag (1)

2-Part, High Temperature, Ultra Strength (1)

2-Part, Non-Sag (4)

2-Part, Pourable (3)

2-Part, Semi-Pourable (1)

2-Part, Trowelable (1)

3-Part, General Purpose, High Performance (1)

3-Part, Light Cure, Repositionable (1)

3-Part, Pourable (2)

3-Part, Semi-Pourable (2)

Chemical Resistant, Impact Resistant, Low Viscosity (1)

Coarse, High Load, Large Particle Abrasion (1)

Extended Work Life, General Purpose, Two-Part (3)

Fast Cure (1)

Fast Cure, High Performance (2)

Fast Cure, High Strength (1)

Fast Fixture, One-Part (2)

Fast Set, Non-Sag, Two-Part (1)

Fast Set, Two-Part (1)

General Purpose (2)

General Purpose, High Performance (1)

General Purpose, High Temperature (1)

General Purpose, Two-Part (3)

High Impact (1)

High Impact, One-Part (1)

High Impact, Two-Part (2)

High Performance (1)

High Performance, High Temperature, Non-Sag, Two-Part (2)

High Performance, Part A, Two-Part (1)

High Performance, Part B, Two-Part (1)

High Performance, Part B/A, Two-Part (2)

High Strength, Two-Part (4)

High Temperature (1)

High Temperature, High Performance (1)

High Temperature, One-Part (1)

Highly Flexible (2)

Low Viscosity, Self-Leveling (1)

Low Viscosity, Two-Part (3)

Magnet Bonder, One-Part (2)

Multi-Purpose (1)

Non-Corrosive, Two-Part (2)

Non-Sag, Two-Part (2)

One-Part (2)

Part A, Two-Part (1)

Part B/A, Two-Part (8)

Self-Leveling (1)

Severe Environment (2)

Two-Part (21)

Brand

3M Scotch-Weld (3)

Devcon 5 minute® (1)

Devcon Fasmetal (1)

Hardman Double-Bubble® (1)

Henkel Locktite® 9462 Hysol® (1)

Henkel Locktite® Fixmaster® Magna-Crete (1)

Henkel Loctite® 330 Depend® (1)

Henkel Loctite® E-05MR Hysol® (1)

Henkel Loctite® Fixmaster® (1)

Henkel Loctite® Fixmaster® Poxy Pak (1)

Henkel Loctite® H8110 Speedbonder (1)

Henkel® Loctite® Fixmaster® Metal Magic Steel (1)

ITW Devcon® (1)

ITW Devcon® 2 Ton® (1)

ITW Devcon® 5 Minute® (4)

ITW Devcon® Floor Patch (1)

ITW Devcon® Plastic Welder (1)

ITW Devcon® Wear Guard (1)

J-B Weld® (5)

J-B Weld® KwikWeld (2)

Oatey® Fix-It (1)

Base Type

Acrylic (15)

Ceramic Epoxy (1)

Epoxy (56)

Epoxy Base, Amine Accelerator (2)

MMA (1)

Methyl Methacrylate (4)

Modified Epoxy (7)

Modified Epoxy Amine (1)

Polyurethane (9)

Silicone (2)

Urethane (1)

Series

1C™, Hysol® (1)

3035™ (1)

3140™, Hysol® (2)

3141™, Hysol® (1)

3142™, Hysol® (1)

3145™, Hysol® (1)

3163™, Hysol® (1)

3165™, Hysol® (1)

3173™, Hysol® (1)

3182™, Hysol® (1)

3183™, Hysol® (1)

3184™, Hysol® (1)

324™ Speedbonder™ (2)

325™ Speedbonder™ (1)

326™ Speedbonder™ (2)

332™ (2)

334™ (1)

3463™ (1)

3472™ (2)

3478™ (1)

392™ (2)

5 Minute® (1)

5091™, Nuva-Sil® (1)

9480™ (1)

AA 312™, Speedbonder™ (3)

AA 325™, Speedbonder™ (1)

AA 330™ Depend® (1)

AA 332™ (1)

AA 334™ (1)

AA 392™ (1)

AA H8000™, Speedbonder™ (2)

E-20HP™, Hysol® (1)

EA 3336™ (1)

EA 608™, Hysol® (1)

EA 9131™ (1)

EA 9430™, Hysol® (2)

EA 9460™, Hysol® (1)

EA 9462™, Hysol® (1)

EA E-00CL™/100CL, Hysol® (1)

EA E-00NS™, Hysol® (2)

EA E-05MR™, Hysol® (1)

EA E-120HP™, Hysol® (1)

EA E-30CL™, Hysol® (2)

EA E-40FL™, Hysol® (1)

EA E-60HP™, Hysol® (2)

EA E-90FL™, Hysol® (1)

H4710™, Speedbonder™ (1)

H8110™, Speedbonder™ (1)

Hysol® E-00CL™ (2)

Hysol® E-00NS™ (1)

Hysol® E-05CL™ (2)

Hysol® E-120HP™ (2)

Hysol® E-20HP™ (2)

Hysol® E-20NS™ (2)

Hysol® E-30CL™ (1)

Hysol® E-40FL™ (2)

Hysol® E-60NC™ (3)

Hysol® E-90FL™ (1)

Hysol® U-05FL™ (2)

M-121HP™, Hysol® (1)

M-21HP™, Hysol® (1)

M-31CL™ Hysol® (1)

PC 3466™ (1)

PC 3965™ (1)

PC 7202™ (2)

PC 7204™ (1)

PC 9416™ (2)

PC 9422™ (1)

PC 9626™ (1)

PE 3162™, Hysol® (1)

SI 5083™, Nuva-Sil® (1)

U-09FL™ Hysol® (2)

UK M-06FL™, Hysol® (1)

UK U-05FL™, Hysol® (1)

Wear Guard™ (1)

Container Size

0.1 gal (1)

0.12 fl-oz (1)

1 L (2)

1 gal (7)

1 l (3)

1 lb (3)

1 oz (2)

1 pt (1)

1 qt (7)

1.2 oz (1)

10 lb (2)

10 mL (1)

2 fl-oz (2)

2 gal (2)

2 oz (2)

2.8 oz (1)

20 ml (1)

20.7 oz (1)

200 mL (7)

200 ml (7)

25 mL (3)

25 ml (1)

3 lb (1)

30 lb (1)

300 mL (1)

300 ml (3)

37 ml (4)

4 lb (1)

4 oz (3)

40 lb (1)

400 mL (8)

400 ml (11)

42 lb (1)

45 ml (1)

490 mL (2)

5 fl-oz (1)

5 gal (6)

5 lb (1)

5 oz (1)

50 mL (15)

50 ml (30)

8.4 oz (1)

9 lb (1)

Size

(10) 0.12 fl. oz. (1)

(2) 1 oz. (4)

(2) 5 oz. (2)

0.75 lb. (1)

1 oz. (2)

1 qt. (1)

1.25 oz. (1)

10 lb. (1)

15 oz. (1)

2 oz. (1)

2.50 oz. (1)

25mL (4)

3.5mL (1)

30 lb. (1)

4 oz. (2)

5 gal. (1)

50mL (6)

Item

Cold Weld Epoxy Adhesive (3)

Duo-Pak High Performance Epoxy (1)

Epoxy (1)

Epoxy Adhesive (6)

Epoxy Gel (1)

Epoxy Glue (1)

Epoxy putty (1)

Fast Cure Epoxy Adhesive (3)

Fast Cure Epoxy Gel (1)

Fast Cure Low Viscosity Epoxy (3)

Fast curing Non-Sag Structural Adhesive (1)

High Load Epoxy (1)

Industrial Cold Weld Epoxy Adhesive (2)

Putty (1)

Repair Epoxy (1)

Stik Weld Epoxy Putty (1)

Structural Acrylic Adhesive (1)

Structural Adhesive Epoxy (1)

Structural Adhesive Kit (1)

Container Type

Bottle (10)

Bucket (1)

Can (12)

Cartridge (35)

Dual Cartridge (53)

Dual Syringe Tube (2)

Duo-Pak Cartridge (3)

Kit (22)

Mixer Cup (2)

Mixer Cups (1)

Pack (1)

Pail (12)

Stick (4)

Syringe (4)

Tub (1)

Tube (13)

Color

Amber (14)

Amber/Clear (1)

Beige/Dark Amber (1)

Black (15)

Blue (1)

Brown (4)

Brown/White (1)

Clear (17)

Clear/Amber (1)

Cream (1)

Dark Gray (2)

Gray (25)

Gray/White (1)

Green (2)

Green (Part A: Black; Part B: White (1)

Green, White (1)

Light Amber (4)

Light Gray (1)

Light Tan (2)

Light Yellow (1)

Light Yellow/Dark Amber (1)

Metallic/Black (1)

Off-White (16)

Opaque (1)

Opaque/Amber (1)

Opaque/Light Yellow to Dark Amber (1)

Pale Yellow (2)

Part A: Amber, Part B: Clear/Amber (2)

Part A: Black, Part B: White (2)

Part A: Blue, Part B: Yellow (1)

Part A: Clear, Part B: Amber (1)

Part A: Clear, Part B: Clear to Slight Yellow (1)

Part A: Clear, Part B: Light Yellow, Part C: Amber (1)

Part A: Clear/Yellow, Part B: Light (2)

Part A: Clear/Yellow, Part B: Light/Cream (3)

Part A: Gray, Part B: Amber, Part C: White/Tan (2)

Part A: Gray, Part B: Blue (4)

Part A: Gray/White, Part B: Blue, Part C: Tan/Gray (1)

Part A: Green, Part B: Amber (1)

Part A: Light, Part B: Grey (2)

Part A: Milky White, Part B: Translucent/Amber (1)

Part A: Off-White, Part B: Green (1)

Part A: Off-White, Part B: Light Yellow, Part C: Clear/White, Part D: Light Yellow, Part E: White/Tan (1)

Part A: Opaque/White, Part B: Black, Part C: White (1)

Part A: Opaque/Yellow, Part B: Blue (1)

Part A: Orange, Part B: Amber (1)

Part A: Pale Yellow to Off-White, Part B: Amber (1)

Part A: Pale Yellow to Off-White, Part B: Light Yellow (3)

Part A: Pale Yellow to Off-White, Part B: Yellow (2)

Part A: Red, Part B: Amber, Part C: Off-White (1)

Part A: Translucent/White, Part B: Yellow (1)

Part A: White, Part B: Amber (1)

Part A: White, Part B: Black (1)

Part A: White, Part B: Dark/Blue/Black (1)

Part A: Yellow, Part B: Translucent (1)

Part A: Yellow/Opaque, Part B: Blue (2)

Straw (1)

Translucent (6)

Transparent (1)

White (1)

White/Off-White (1)

Yellow (3)

Form

Liquid (105)

Liquid/Paste (1)

Liquid/Viscous (1)

Part A: Aerosol, Part B: Liquid (2)

Part A: Liquid, Part B: Aerosol (1)

Part A: Liquid, Part B: Liquid, Part C: Liquid, Part D: Liquid, Part E: Solid/Granules (1)

Part A: Liquid, Part B: Liquid, Part C: Powder (1)

Part A: Liquid, Part B: Liquid, Part C: Solid/Granules (2)

Part A: Liquid, Part B: Liquid/Paste (2)

Part A: Liquid, Part B: Liquid/Viscous (1)

Part A: Liquid, Part B: Paste (1)

Part A: Liquid/Paste, Part B: Paste (2)

Part A: Paste, Part B: Liquid (4)

Part A: Paste/Liquid, Part B: Paste (1)

Part A: Paste/Liquid, Part B: Paste, Part C: Liquid (1)

Part A: Solid/Granules, Part B: Liquid, Part C: Paste/Liquid (1)

Part A: Viscous Liquid, Part B: Liquid (1)

Paste (14)

Paste, Gel (1)

Pasty (1)

Putty (2)

Solid (2)

Viscous/Liquid (1)

Waxy Solid (1)

Net Weight

10 lb/gal (1)

10.3 - 10.7 lb/gal Base, 8.5 - 8.9 lb/gal Accelerator (3)

10.8 lb/gal Base, 7.9 lb/gal Accelerator (1)

10.8 lb/gal Base, 8.7 lb/gal Accelerator (1)

11 - 11.4 lb/gal Base, 10.6 - 11 lb/gal Accelerator (3)

11.1 - 11.6 lb/gal Base, 10.5 - 11 lb/gal Accelerator (4)

11.2 lb (1)

8.4 lb/gal Base, 8.1 lb/gal Accelerator (1)

9.1 - 9.4 lb/gal Base, 9 - 9.3 lb/gal Accelerator (2)

9.1 - 9.5 lb/gal Base, 9.4 - 9.8 lb/gal Accelerator (1)

9.3 - 9.7 lb/gal Base, 8.2 - 8.6 lb/gal Accelerator (1)

9.3 - 9.7 lb/gal Base, 8.4 - 8.6 lb/gal Accelerator (3)

9.3 - 9.7 lb/gal Base, 8.8 - 9.2 lb/gal Accelerator (5)

9.3 - 9.7 lb/gal Base, 9 - 9.4 lb/gal Accelerator (4)

9.5 - 9.9 lb/gal Base, 9.2 - 9.6 lb/gal Accelerator (1)

9.6 - 10 lb/gal Base, 9.2 - 9.6 lb/gal Accelerator (1)

9.6 - 9.7 lb/gal Base, 8.0 - 8.2 lb/gal Accelerator (2)

Flash Point

118.33 deg C (2)

14 deg C (1)

157.1 deg F (1)

163 deg C (3)

172 deg F (1)

172.4 deg F (1)

195 deg C (1)

200 deg F (6)

201 deg F (5)

205 deg F (2)

220 deg F (1)

240 deg C Base, 149 deg C Accelerator (1)

240 deg F (2)

248 deg C (3)

248.88 deg C (2)

249 deg C (2)

290 deg F (1)

300 deg F (2)

340 deg F (4)

354 deg F (3)

366.8 deg F (1)

474 deg F (2)

480 deg F (9)

480 deg F Base, 340 deg F Accelerator (1)

50 deg F (1)

69.5 deg C (2)

77.2 deg C (3)

81.5 deg C (2)

90 deg C (2)

93 deg C (3)

< 1% (1)

> 100 deg C (1)

> 148.9 deg C (2)

> 200 deg F (1)

> 93 deg C (7)

> 93.3 deg C (2)

> 93.4 deg C (1)

>100 deg C (1)

>149 deg C (1)

>199.4 deg F (13)

>199.94 deg F (2)

>200.12 deg F (1)

>300.2 deg F (1)

>400 deg F (1)

>93 deg C (3)

>93.3 deg C (2)

Part A: 14 deg C, Part B: > 93 deg C (3)

Part A: 149 deg C, Part B: > 93 deg C (1)

Part A: 204 deg C, Part B: 118 deg C (2)

Part A: 204 deg C, Part B: > 93 deg C (3)

Part A: 248 deg C, Part B: 121 deg C (1)

Part A: 249 deg C, Part B: > 100 deg C, Part C: > 93 deg C, Part D: 101 deg C (1)

Part A: 75.5 deg C, Part B: > 93 deg C (1)

Part A: 76 deg C, Part B: > 93.4 deg C (2)

Part A: 82.5 deg C, Part B: 95 deg C (1)

Part A: 83 deg C, Part B: -4 deg C (1)

Part A: 84 deg C, Part B: 102.78 deg C (2)

Part A: 95.9 deg C, Part B: > 93.94 deg C (1)

Part A: 96.11 deg C, Part B: > 93 deg C (7)

Part A: 96.11 deg C, Part B: > 93.4 deg C (1)

Part A: > 149 deg C, Part B: > 93 deg C (1)

Part A: > 200 deg C, Part B: > 100 deg C (1)

Part A: > 93 deg C, Part B: 157 deg C (1)

Part A: > 93 deg C, Part B: > 149 deg C (1)

Part A: > 93 deg C, Part B: > 93.4 deg C (1)

Part A: > 93.33 deg C, Part B: > 93 deg C (1)

Part A: > 93.4 deg C, Part B: 258 deg C (2)

Part A: >199.9 deg F (2)

Part A: >200 deg F; Part B: >=50 deg F (1)

Pat A: > 96.11 deg C, Part B: > 160 deg C (1)

Odor/Scent

Acetic Acid (2)

Amine/Fishy (1)

Ammoniacal (2)

Ammoniacal/Irritating (1)

Aromatic (6)

Aromatic/Slight (1)

Characteristic (4)

Epoxy (8)

Faint, Epoxy (5)

Hydrocarbon (1)

Irritating, Sharp (4)

Little (1)

Low (1)

Mercaptan (3)

Mercaptan/Sulfur (1)

Mild (8)

Mild Epoxy (1)

Mild/Epoxy (1)

Mild/Solvent (2)

Odorless (1)

Part A: Acrylate, Part B: Ammoniacal, Part C: Mild (1)

Part A: Characteristic, Part B: Ammoniacal (1)

Part A: Epoxy/Faint, Part B: Mild (5)

Part A: Epoxy/Faint, Part B: Slight (3)

Part A: Ethereal, Part B: Amine (2)

Part A: Faint/Epoxy, Part B: Mercaptan/Sulfur (2)

Part A: Faint/Epoxy, Part B: Mild (2)

Part A: Hydrocarbon; Part B: Methacrylate (1)

Part A: Irritating/Sharp, Part B: Aliphatic (1)

Part A: Mercaptan, Part B: Epoxy (1)

Part A: Mild, Part B: Ammoniacal (5)

Part A: Mild, Part B: Mercaptan (1)

Part A: Mild, Part B: Slight (1)

Part A: Mild, Part B: Slight/Ammoniacal (2)

Part A: Mild, Part B:Amine (1)

Part A: Nondescript, Part B: Ammonia, Part C: Mild, Part D: Slight/Ammoniacal (1)

Part A: Sharp, Part B: Mild (1)

Part A: Sharp, Part B: Slight/Characteristic (2)

Part A: Slight, Part B: Slight/Amine-Like (1)

Part A: Slight, Part B: Slight/Ammoniacal (1)

Part A: Slight, Part B: Slight/Aromatic (1)

Part A: Slight/Aromatic, Part B: Mild (1)

Part A: Sweet, Part B: Ammoniacal (2)

Part B: Ammoniacal/Strong (1)

Part B: Mercaptan (1)

Part B: Slight/Amine (1)

Pungent (4)

Pungent Acrylic (1)

Sharp (9)

Slight (8)

Slight Amine (1)

Slight Epoxy (8)

Strong Mercaptan (3)

Strong, Ammoniacal (2)

Very Mild (7)

Very Slight (4)

Coverage

0.25 sq-ft (1)

13 cu-in (1)

15 sq-ft (1)

16 sq-in (2)

17 cu-in (1)

230 cu-in/gal (2)

320 sq-ft/gal (14)

37.36 cu-in (1)

378 cu-in (2)

50 sq-in/lb (1)

52 cu-in (1)

620 cu-in (1)

660 cu-in (1)

Specific Gravity

0.89 (1)

0.95 (1)

1 (5)

1 - 1.2 (1)

1.0113 (3)

1.03 (1)

1.0623 (1)

1.063 (1)

1.07 (1)

1.078 to 1.09 (2)

1.08 (7)

1.09 (1)

1.1 (22)

1.11 (1)

1.12 (5)

1.13 (4)

1.14 (3)

1.15 (7)

1.16 (4)

1.17 (7)

1.2 (5)

1.29 (2)

1.3 (1)

1.32 (3)

1.34 (1)

1.37 (1)

1.4 (1)

1.47 (2)

1.5 (1)

1.6 (4)

1.67 (1)

1.68 (1)

1.9 (1)

1.927 - 1.902 (2)

2.2 (1)

2.247 (1)

2.4 (1)

> 1 (2)

Part A: 0.8808, Part B: 0.9813 (1)

Part A: 0.94, Part B: 1.15 (1)

Part A: 0.94, Part B: 1.1674 (2)

Part A: 0.9969 (1)

Part A: 1.04, Part B: 0.96, Part C: 1.04 (1)

Part A: 1.08; Part B: 1.07 (1)

Part A: 1.1, Part B: 1 (1)

Part A: 1.1, Part B: 1.15 (2)

Part A: 1.1299, Part B: 1.03, Part C: 2.65 (2)

Part A: 1.14, Part B: 1.57 (1)

Part A: 1.15, Part B: 0.98 (1)

Part A: 1.16, Part B: 0.7694 (1)

Part A: 1.17, Part B: 1.12 (2)

Part A: 1.17, Part B: 1.15 (1)

Part A: 1.18, Part B: 1.12 (1)

Part A: 1.19, Part B: 0.97 (1)

Part A: 1.1908, Part B: 1.1822 (1)

Part A: 1.2 - 1.4 (1)

Part A: 1.2555, Part B: 1.0242, Part C: 1.1, Part D: 1.0242, Part E: 2.65 (1)

Part A: 1.27, Part B: 1.07, Part C: 1.136 (1)

Part A: 1.3, Part B: 1.08 (2)

Part A: 1.35, Part B: 1.31 (1)

Part A: 1.4, Part B: 1 (1)

Part A: 1.57, Part B: 1.65 (1)

Part A: 1.61 - 1.71, Part B: 0.98 (1)

Part A: 1.62, Part B: 0.98 (1)

Part A: 1.663, Part B: 0.988, Part C: 2.6 - 2.95 (1)

Part A: 1.663, Part B: 1.663 (1)

Part A: 1.7152, Part B: 0.99 (1)

Part A: 2.352, Part B: 0.99 (2)

Part A: > 1, Part B: 1.31 (1)

Part B: 0.9902, Part C: 2.69 (1)

Functional Cure

10 min. (1)

Applicable Materials

ABS, Nylon, Painted Surface, Easy-to-Bond (HSE), PVC, Epoxy - Fiber Reinforced, Engineered Thermoplastics, Polyolefin Foam, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Acrylic, Glass & Ceramics, Wood & Hardboard, Aluminum, Stainless Steel, Plastics (Flexible Vinyl) and Thermosets - Fiber Reinforced (1)

ABS, PVC, Acrylic and Metal (1)

Alnico, Ferrite, Neodymium Metal (4)

Aluminum Metal (1)

Aluminum, Steel (1)

Ceramic and Metal (1)

Ceramic, Concrete, Glass, Metal, Wood (1)

Ceramic, Concrete, Masonry, Metal and Plastic (2)

Ceramic, Fabric, Glass, Metal and Plastic (1)

Ceramic, Ferrite, Metal, Plastic, Wood (1)

Ceramic, Fiberboard, Glass, Metal and Wood (1)

Ceramic, Fiberboard, Glass, Metal, Plastic, Rubber and Wood (10)

Ceramic, Glass and Metal (7)

Ceramic, Glass, Masonry, Metal, Plastic and Rubber (1)

Ceramic, Glass, Masonry, Metal, Plastic, Rubber and Wood (2)

Ceramic, Glass, Metal and Plastic (2)

Ceramic, Glass, Metal and Thermoplastic (1)

Ceramic, Glass, Metal, Plastic, Polycarbonate, Thermoplastic (1)

Ceramic, Glass, Metal, Plastic, Rubber and Wood (5)

Ceramic, Glass, Metal, Plastic, Rubber, Wood (3)

Ceramic, Glass, Metal, Polycarbonate, Polyvinyl Chloride, Thermoplastic (1)

Ceramic, Glass, Metal, Thermoplastic, Thermoset Plastic (1)

Ceramic, Metal and Plastic (5)

Ceramic, Metal, Plastic (12)

Ceramic, Metal, Plastic, Wood (1)

Ceramic, Plastic, Metal (1)

Concrete (7)

Concrete, Metal, Wood (5)

Ferrite, Neodymium, Alnico Metal, Plastic (1)

Ferrite, Neodymium, Alnico Metal, Plastic, Ceramic, Glass (2)

Fiberglass and Metal (1)

Glass, Ceramic, Metal (1)

Glass, Ceramics, Metal, Wood and Hardboard (1)

Glass, Hard Plastics, Rubber and Metal (1)

Glass, Metal, Plastic and Wood (2)

Glass, Metal, Plastic, Thermoplastic (1)

Glass, Metal, Plastic, Wood (1)

Glass, Metal, Polycarbonate, Plastic (1)

Glass, Rubber and Metal (1)

High Performance Nylon, Plastics ABS, PVC, Acrylic, Metal, Glass, Ceramics, Wood, Hardboard and EPDM Rubber (1)

Metal (9)

Metal and Plastic (1)

Metal, Glass, Ceramics, Wood and Hardboard (2)

Metal, Plastic (1)

Metal, Polyolefins, Thermoplastic Elastomers, Glass, Ceramics, EPDM Rubber, Wood and Hardboard (2)

Metal, Steel (2)

Metal, Wood, Glass and Ceramic (1)

Most Metals, Fabric, Ceramic, Glass, Concrete and Wood (1)

Nylon, ABS, PVC, Acrylic, Metal, Glass, Ceramics, Wood and Hardboard (1)

Plastic (4)

Plastics, Metal, Glass and Ceramics (1)

Plastics, Metal, Glass, Ceramics, Wood, Hardboard and Rubber (7)

Rigid Foam (Beadboard Styrene), Fabric, Felt, Cork and Fibrous Glass (2)

Stainless Steel (1)

Thermoplastic (3)

Flammability Rating

1 (27)

2 (5)

2% (Acrylic Acid) Lower, 8% (Acrylic Acid) Upper (1)

3 (1)

4 (5)

Part A: 4, Part B: 2 (1)

Includes

30 lb Kit, Resin and Hardener (1)

Concrete Repair Flooring (1)

Bonds To

Concrete, Masonry, Ceramic, Wood and Metal (1)

Temperature Rating

-40 to 200 deg F (1)

-65 to 180 deg F (1)

-65 to 250 deg F (1)

-65 to 250 deg F (Operating), 46.4 - 82.4 deg F (Storage) (2)

-65 to 300 deg F (5)

-65 to 300 deg F (Operating), 46.4 - 69.8 deg F (Storage) (1)

-65 to 350 deg F (3)

-67 to 300 deg F (4)

121.1 deg C (1)

130 deg F (1)

150 deg F (1)

160 deg F (1)

180 - 250 deg F (1)

180 deg F (11)

200 deg F (2)

225 deg F (4)

230 deg F (2)

250 deg F (32)

250 deg F (Operating), 46.4 - 69.8 deg F (Storage) (2)

300 deg F (5)

35.6 - 114.8 deg F (1)

350 deg F (2)

350 deg F (Operating), 46.4 - 82.4 deg F (Storage) (4)

40 deg F (1)

400 deg F (2)

450 deg F (1)

46.4 - 69.8 deg F (1)

550 deg F (2)

72 deg F (34)

82.4 deg F (Storage) (2)

>82.4 deg F (Storage) (2)

Full Cure

1 hr. (3)

12 hr. (6)

15 to 24 hr. (1)

16 hr. (3)

24 hr. (5)

4 hr. (2)

7 Days (3)

Up to 24 hr. (3)

Application Time

1.5 hr (1)

10 min (5)

120 min (3)

15 min (7)

2 - 4 min (1)

2 hr (1)

20 - 40 min (1)

20 min (14)

25 min (9)

3 - 6 min (1)

3 hr (1)

3 min (5)

3.5 min (1)

30 - 45 min (1)

30 min (5)

4 min (3)

4.75 hr (1)

40 - 60 min (1)

40 min (6)

45 min (2)

5 - 10 min (2)

5 min (13)

50 min (3)

55 min (1)

60 - 90 min (1)

60 min (9)

7 min (3)

70 min (2)

8 - 13 min (2)

80 min (1)

90 min (9)

Mixing Ratio

100:11.6 By Volume/100:6.9 By Weight (2)

10:1 (6)

10:3 (1)

10:5 (1)

10:6 (1)

1:01 (20)

1:02 (1)

1:1 (29)

1:2 (2)

1:3.01 (1)

1:4.81 (1)

1:5.2 (2)

2:01 (9)

2:03 (4)

2:1 (19)

3.1 : 1 By Volume/100 : 20 By Weight (2)

3.5:1 By Volume/100:16 By Weight (1)

3.78:1 (2)

3:02 (1)

4.1:1 (1)

4.6:1 - 9.8 (2)

4:1 (1)

4:1 By Volume/9.5:1 By Weight (2)

4:1/7.25:1 (1)

4:5 (1)

5:4 (1)

9.7:1 (1)

Part A: 5:1/Part B: 9:1 (1)

¿2.5:1 (1)

Composition

4,7,10-Trioxatridecane-1,13-Diamine, Amorphous Silica (1)

4-Nonylphenol, Branched with Isomers, 4,4'-Methylenebis(2-Methylcyclohexylamine), Benzyl Alcohol (1)

Acrylic Polymer (1)

Aliphatic Polymer Diamine, Kaolin, BIS(3-Aminopropyl) Ether Of Diethylene Glyco, Toluene (4)

Aluminum Hydroxide, Epichlorohydrin-4,4'-isopropylidene Diphenol Resin, Oxirane, Mono[(c12-14-alkyloxy)methyl] Derivates, Carbon Black (1)

Aluminum Hydroxide, Glyceridic Oil, Zeolites, Titanium Dioxide (1)

Aluminum Hydroxide, Polymercaptan Hardener, Substituted Aminophenol, Styrene, Silica, Amorphous, Fumed, Crystal-Free, Ethylene Glycol, Substituted Aminophenol, Benz(A)Anthracene (1)

Aluminum Oxide, Calcium Carbonate, 2-Ethylhexyl Glycidyl Ether, Carbon Black, Quartz (sio2) (1)

Amine Adduct, Tetraethylene Pentamine, Triethylenetetramine (2)

Aromatic Methacrylate Ester, Methacrylic Acid, Resin, Tert-Butyl Perbenzoate, Silica, Amorphous, Fumed, Crystal-Free, Methacrylate Monomer (2)

Bisphenol A-Epichlorohydrin Polymer, Talc, Limestone, 1,2,3-Propanetriyl Ester of 12-(Oxiranylmethoxy)-9-Octadecenoic Acid, Oxide Glass Chemicals, Filler, Stearic Acid, Quartz Silica, Carbon Black and Epichlorohydrin (2)

Calcium Carbonate, Epoxy Resin, Limestone, Butyl 2,3-Epoxypropyl Ether, Quartz (sio2), Carbon Black (1)

Calcium Carbonate, Limestone, Butyl 2,3-Epoxypropyl Ether, Quartz (sio2), Carbon Black (1)

Castor Oil, Polypropylene Glycol, Amorphous Silica (1)

Dibenzoate Propanol, Acrylate Polymer, Organic Peroxide, Catalyst (1)

Diphenylmethane Diisocyanate, Isomers And Homologues, Methylenebis(Phenylisocyanate), Methylene Bisphenyl Isocyanate (1)

Epichlorohydrin-4,4'-isopropylidene Diphenol Resin, Filler, Glass, Epoxy Resin, Catalyst (1)

Epichlorohydrin-4,4'-isopropylidene Diphenol Resin, Treated Fumed Silica, Glass, Oxide, Chemicals (1)

Epoxy Resin (5)

Epoxy Resin, Acrylic Polymer (3)

Epoxy Resin, Acrylic Polymer, Amorphous Silica (1)

Epoxy Resin, Acrylic Polymer, Carbon Black (2)

Epoxy Resin, Aluminum Hydroxide, Titanium Dioxide, Epoxy Resin, Distillates, Petroleum, Heavy Thermal Cracked, Ethylene Glycol (1)

Epoxy Resin, Aluminum Pigments, N-Butyl Glycidyl Ether, Clay, Amorphous Silica, Resorcinol, Quartz Silica (1)

Epoxy Resin, Amorphous Silica (1)

Epoxy Resin, Hydrocarbon Resin, Carbon Black (1)

Epoxy Resin, Kaolin (3)

Epoxy Resin, Kaolin, Amorphous Silica, Carbon Black (3)

Epoxy Resin, Kaolin, Clay (NJTS Reg No 04499600-7159), Calcium Carbonate (1)

Epoxy Resin, Methacrylate/Butadiene/Styrene Polymer, Hydrogenated Terphenyl, Hydrogenated Polyphenyls, Amorphous Silica (1)

Epoxy Resin, Methacrylate/Butadiene/Styrene Polymer, Hydrogenated Terphenyl, Hydrogenated Polyphenyls, Titanium Dioxide (1)

Epoxy Resin, Non-Volatile Amide (NJTS Reg No 04499600-7198), Amorphous Silica (1)

Epoxy Resin, Organosilane (1)

Epoxy Resin, Pigment (3)

Epoxy Resin, Substituted Silane (4)

Epoxy Resin, Substituted Silane, Epoxy Resin (2)

Epoxy Resin, Treated Fumed Silica (1)

Ethyl 2-Cyanoacrylate, Thickener, Filler (1)

Fatty Acids, Tall-Oil, Reaction Products With Tetraethylenepentamine, Tetraethylene Pentamine (1)

Glyceridic Oil, Zeolites, Carbon Black (1)

Hydroxyalkyl Meth Acrylate Polyurethane Methacrylate Resin, Acrylic Acid, Cumene Hydroperoxide, Polyglycol Dimethacrylate, Methacrylic Acid, Amine, Substituted Silane, Hydroxyalkyl Meth Acrylate Cumene (1)

Kaolin, Polyglycol Diamine, Phenolic Acid, Glycerol, Substituted Aminophenol, Silica, Amorphous, Fumed, Crystal-Free, Substituted Aminophenol, Epoxy Resin, Titanium Dioxide, Ti-Oxid Anatase (2)

Kaolin, Polyglycol Diamine, Silicon Dioxide, Epoxy Resin, Titanium Dioxide, Ti-Oxid Anatase (1)

Mercaptan-Terminated Epoxy Curing Agent, Talc, Limestone, Butyl Benzyl Phthalate, Tris(2,4,6-Dimethylaminomonomethyl) Phenol, Dimethyl Siloxane, Reaction Product with Silica, Quartz Silica (1)

Methacrylate Monomer, Methacrylic Acid, Silica, Amorphous, Fumed, Crystal-Free, Acrylic Acid, Methacrylate Monomer, Tert-Butyl Perbenzoate (2)

Methacrylate Monomer, Methacrylic Acid, Silica, Amorphous, Fumed, Crystal-Free, Acrylic Acid, Tert-Butyl Perbenzoate (1)

Methyl Methacrylate, Synthetic Polymer, Methacrylic Acid, Acrylic Polymer (1)

Modified Epoxy Resin, 4,7,10-Trioxatridecane-1,13-Diamine, Amorphous Silica, Calcium Salt, 2,4,6-Tris((Dimethylamino)Methyl))Phenol (1)

N-aminoethylpiperazine, 4-Nonylphenol Branched (1)

Part A: 2-Propanol, Carbon Dioxide, Trichloroethylene, Butanal, Reaction Products With Butylamine; Part B: Hydroxyalkyl Meth Acrylate Polyurethane Methacrylate Resin, Acrylic Acid, Cumene Hydroperoxide, Polyglycol Dimethacrylate, Methacrylic Acid, Amine, Substituted Silane, Hydroxyalkyl Meth Acrylate Cumen (1)

Part A: Acrylated Epoxy, Epoxy Resin, Trimethylolpropane Triacrylate; Part B: Polyglycol Diamine, Part C: Acrylated Epoxy, Polyglycol Diamine, Epoxy Resin, Trimethylolpropane Triacrylate (1)

Part A: Aluminum, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether, Gamma-Glycidoxypropyl Trimethoxysilane; Part B: Triethylenetetramine, Amine Adduct, Substituted Piperazine, Nonylphenol, Amine Reacted Fatty Acid, Aliphatic Amine, Diethylenetriamine, 4,4'-isopropylidenediphenol, Tetraethylene Pentamine (1)

Part A: Bisphenol A Diglycidyl Ether Resin, Part B: Proprietary Component(s) (1)

Part A: Dibenzoate Propanol, Acrylate Polymer, Catalyst, Organic Peroxide; Part B: Methyl Methacrylate Acrylonitrile-Butadiene Polymer, Fillers, Bisphenol A Polyethylene Glycol Diether Dimethacrylate, Hydroxyethyl Methacrylate Dispersing Agent, Phosphate Esters of PPG Methacrylate (1)

Part A: Diiron Trioxide, Epoxy Resin, Neopentyl Glycol Diglycidyl Ether, Manganese, Gamma-Glycidoxypropyl Trimethoxysilane; Part B: Triethylenetetramine, Amine Adduct, Substituted Piperazine, Nonylphenol, Amine Reacted Fatty Acid, Aliphatic Amine, Diethylenetriamine, 4,4'-isopropylidenediphenol, Tetraethylene Pentamine (2)

Part A: Epoxy Resin, Butyl 2,3-Epoxypropyl Ether, Titanium Dioxide; Part B: Diethylenetriamine, 4,4'-isopropylidenediphenol; Part C: Quartz (sio2) (2)

Part A: Epoxy Resin, Butyl 2,3-Epoxypropyl Ether; Part B:Amine Reacted Fatty Acid, Tetraethylene Pentamine, Diethylenetriamine, Triethylenetetramine, Distillates (Petroleum), Hydro treated Light, Part C: Limestone, Quartz (sio2) (1)

Part A: Epoxy Resin, Kaolin; Part B: Kaolin, Polyglycol Diamine, Amorphous, Fumed, Crystal-Free, Substituted Aminophenol, Epoxy Resin, Titanium Dioxide, Ti-oxid Anatase (1)

Part A: Epoxy Resin, Kaolin; Part B: Kaolin, Polyglycol Diamine, Phenolic Acid, Glycerol, Substituted Aminophenol, Silica, Amorphous, Fumed, Crystal-Free, Substituted Aminophenol, Epoxy Resin, Titanium Dioxide, Ti-oxid Anatase (1)

Part A: Epoxy Resin, Nonylphenol, Silicon Dioxide; Part B: Polyamide, Diethylenetriamine, 4,4'-isopropylidenediphenol, Epoxy Resin, Triethylenetetramine, Silicon Dioxide (1)

Part A: Epoxy Resin, Polymer Resin, Quartz (sio2), Ethylene Glycol, Titanium Dioxide; Part B: Quartz (sio2), Amine Adduct, Benzyl Alcohol, Substituted Piperazine, 4-Nonylphenol, Branched, Substituted Aminophenol, Ethylene Glycol (1)

Part A: Epoxy Resin, Quartz (sio2), Neopentyl Glycol Diglycidyl Ether, Treated Fumed Silica, Titanium Dioxide, Microcrystalline Silica; Part B: Quartz (sio2), Benzyl Alcohol, Cycloaliphatic Amine, Alkyl Phenol, Substituted Piperazine, Silica, Amorphous, Fumed, Crystal-Free, Phenol, Microcrystalline Silica (1)

Part A: Epoxy Resin, Quartz (sio2), Oxirane, 2,2'-[1,4-cyclohexanedilbis (methyleneox), Treated Fumed Silica, Titanium Dioxide, Microcrystalline Silica; Part B: Quartz (sio2), Benzyl Alcohol, Cycloaliphatic Amine, Substituted Piperazine, Silica, Amorphous, Fumed, Crystal-Free, Phenol, Microcrystalline Silica, Epoxy Resin (1)

Part A: Epoxy Resin, Silica, Amorphous, Fumed, Crystal-Free, Ethylene Glycol; Part B: Polymercaptan Hardener, Substituted Aminophenol, Silica, Amorphous, Fumed, Crystal-Free, Ethylene Glycol (1)

Part A: Epoxy Resin, Substituted Silane; Part B: 2,2'-[1,2-Ethanediylbis(Oxy)]bis(ethanethiol), Aliphatic Amines, Amine, Polyglycol Diamine, Benzyldimethylamine (1)

Part A: Epoxy Resin, Substituted Silane; Part B: 3,3'-oxybis(ethyleneoxy)Bis(Propylamine), Substituted Aminophenol (2)

Part A: Epoxy Resin, Substituted Silane; Part B: Polyglycol Diamine (2)

Part A: Epoxy Resin, Substituted Silane; Part B: Polyglycol Diamine, Acid Salt, Glycerol, Substituted Aminophenol, Diethyleneglycol Monoethyl Ether, Alcohol Derivative, Ethylene Glycol (1)

Part A: Epoxy Resin, Substituted Silane; Part B: Polyglycol Diamine, Acid Salt, Glycerol, Substituted Aminophenol, Diethyleneglycol Monoethyl Ether, Alcohol Derivative, Substituted Aminophenol, Ethylene Glycol (1)

Part A: Epoxy Resin, Substituted Silane; Part B: Polymercaptan Hardener, Benzyldimethylamine, Monoethanolamine (1)

Part A: Epoxy Resin, Substituted Silane; Part B:Amine Adduct, Tetraethylene Pentamine, Triethylenetetramine (2)

Part A: Epoxy Resin, Titanium Dioxide, Silicon Dioxide, Aluminum Hydroxide, Carbon Black; Part B: Benzyl Alcohol, Formaldehyde Amine Polymer, M-Phenylenebis(Methylamine), Aliphatic Amine, Phenolic Acid, Substituted Amine, Part C: Epoxy Resin, Oxirane, Mono[(c12-14-alkyloxy)methyl]derivates, Part D: Amine Reacted Fatty Acid, Amine Adduct, Polyamide, Benzyl Alcohol, Cycloaliphatic Amine, Tetraethylene Pentamine, Triethylenetetramine, Tertiary Amine; Part E: Quartz (sio2) (1)

Part A: Epoxy Resin, Treated Fumed Silica, Substituted Silane; Part B: Polymercaptan Hardener, Substituted Aminophenol, Treated Fumed Silica, Substituted Aminophenol (1)

Part A: Epoxy Resin, Treated Fumed Silica; Part B: Polymercaptan Hardener, Benzyldimethylamine, Treated Fumed Silica, Monoethanolamine (2)

Part A: Ferrosilicon, Epoxy Resin, Treated Fumed Silica, Substituted Silane; Part B: Calcium Carbonate, Epoxy Polyamine Adduct, Amine Adduct, Triethylenetetramine, Diethylenetriamine, Silica Filler, Nonylphenol, Titanium Dioxide, 4-Methylimidazole (1)

Part A: Limestone, Epoxy Resin, Calcium Carbonate, Alkyl Phenol, Butyl 2,3-Epoxypropyl Ether, Quartz (sio2); Part B: Polymercaptan Hardener, Substituted Aminophenol, Aluminum, Titanium Dioxide, Substituted Aminophenol (1)

Part A: Limestone, Quartz (sio2); Part B: Substituted Piperazine, Triethylenetetramine, Substituted Amine, Diethylenetriamine, Carbon Black; Part C: Limestone (1)

Part A: Methyl Meth Acrylate 2-Hydroxyethyl Meth Acrylate Ceramic Materials And Wares, Chemicals, Methacrylic Acid, Methacrylate Ester, 4-methoxyphenol, Tert-Butyl Perbenzoate, Titanium Dioxide, Talc, Carbon Tetrachloride; Part B: Methyl Meth Acrylate Aldehyde-Amine Condensate, Phthalate Ester, Carbon Black, Part C: Methyl Meth Acrylate 2-Hydroxyethyl Meth Acrylate Ceramic Materials And Wares, Chemicals, Methacrylic Acid, Methacrylate Ester, 4-methoxyphenol, Tert-Butyl Perbenzoate, Titanium Dioxide, Talc, Glass, Oxide, Chemicals, 1,1,2-trichloroethane (1)

Part A: Methyl Meth Acrylate Methacrylate Ester, Methacrylic Acid, Methacrylate Ester, Talc, Part B: Benzoyl Peroxide, Epoxy Resin, Benzyl Butyl Phthalate (1)

Part A: Methyl Meth Acrylate Methacrylate Ester, Methacrylic Acid, N,N-Dimethyl-P-Toluidine, Talc, Glass, Oxide, Chemicals; Part B: Benzoyl Peroxide, Epoxy Resin, Benzyl Butyl Phthalate (1)

Part A: Methyl Meth Acrylate Methacrylate Ester, Methacrylic Acid, Talc; Part B: Benzoyl Peroxide, Epoxy Resin, Benzyl Butyl Phthalate (1)

Part A: Propanol, [(1-methyl-1,2-Ethanediyl)Bis(Oxy)]bis-, Polymer With 1,1'-methylenebis[isocyanatobenzene, Methylenebis(Phenylisocyanate), O-(isocyanatobenzyl)Phenyl Isocyanate; Part B: Treated Fumed Silica, Glyceridic Oil, Zeolites, Dibutyltin Di(Acetate) (1)

Part A: Quartz (sio2), Epoxy Resin, C.i. Pigment Green 17; Part B: Triethylenetetramine (1)

Part A: Quartz (sio2), Epoxy Resin; Part B: Triethylenetetramine (1)

Part A: Reaction Product: Bisphenol-A-(Epichlorhydrin); Epoxy Resin, Crystalline Silica Non-Respirable, Carbon Black Respirable, Part B: 2,4,6-Tris(Dimethylaminomethyl)Phenol, 1,4-Diazabicyclooctane, Titanium Dioxide (1)

Part A: Reaction Product: Bisphenol-A-(Epichlorhydrin); Epoxy Resin, Crystalline Silica Non-Respirable, Carbon Black Respirable, Part B: Benzyl Alcohol, 2,4,6-Tris(Dimethylaminomethyl)Phenol, 1,4-Diazabicyclooctane, Titanium Dioxide (1)

Part A: Talc, Epoxy Resin, Titanium Dioxide, Substituted Silane, Aluminum Hydroxide; Part B: Talc, Epoxy Resin/Curing Agent, Quartz (sio2), Diethylenetriamine, 4,4'-isopropylidenediphenol, Substituted Silane, Substituted Piperazine (1)

Part A: Tetrahydrofurfuryl Meth Acrylate Alkyl Meth Acrylate Organoboron Amine Complex; Part B: Tetrahydrofurfuryl Methacrylate Alkyl Methacrylate (1)

Part A: Tetrahydrofurfuryl Meth Acrylate Methacrylic Acid, Alkyl Meth Acrylate Epoxy Resin, Methacrylate Monomer, Talc, Cumene Hydroperoxide, 1,1,2-trichloroethane; Part B: N-Heptane, Aldehyde-Amine Condensate, Isobutane, 2-Propanol, Methylcyclohexane, Octane (1)

Part A: Treated Fumed Silica, Zeolites; Part B: Propanol, [(1-methyl-1,2-Ethanediyl)Bis(Oxy)]bis-, Polymer With 1,1'-methylenebis[isocyanatobenzene], Methylenebis(Phenylisocyanate), O-(p-isocyanatobenzyl)Phenyl Isocyanate (1)

Polyester Resin, Polypropylene Glycol, Talc (2)

Polyether Polyol, Tetrakis(2-Hydroxypropyl)Ethylenediamine, Propoxylated Trimethylolpropane, Amorphous Silica, BIS(1, 2, 2, 6, 6-Pentamethyl-4-Piperidinyl) sebacat, Polymeric Benzotriazole, Polymeric Benzotriazole, Substituted Piperydinyl Sebacate (1)

Polymercaptan Hardener, Tertiary Amine, Monoethanolamine (2)

Polymethylene Polyphenylene Isocyanate, Urethane Prepolymer (1)

Polyurethane Methacrylate Resin, 2-Hydroxyethyl Meth Acrylate Monomer, Methacrylic Acid, Treated Fumed Silica, Tert-Butyl Perbenzoate, Stabilizer, Saccharin (1)

Polyurethane Methacrylate Resin, 2-Hydroxyethyl Methacrylate, Acrylate Monomer, Methacrylic Acid, Treated Fumed Silica, Tert-Butyl Perbenzoate, Stabilizer, Saccharin (1)

Polyurethane Methacrylate Resin, 2-Hydroxyethyl Methacrylate, High Boiling Methacrylate, Hydroxyalkyl Methacrylate, Acrylic Acid, Saccharin, Adhesion Promoter, Cumene Hydroperoxide, Saccharin, Cumene (2)

Polyurethane Methacrylate Resin, 2-Hydroxyethyl Methacrylate, High Boiling Methacrylate, Hydroxyalkyl Methacrylate, Tert-Butyl Perbenzoate, Acrylic Acid, Saccharin, Adhesion Promoter (2)

Polyurethane Methacrylate Resin, Polyglycol Dimethacrylate, Hydroxyalkyl Meth Acrylate Acrylic Acid, Saccharin, Tert-Butyl Perbenzoate, Cumene Hydroperoxide, Substituted Silane, Adhesion Promoter, Polyglycol Dimethacrylate, Methanol, Cumene (1)

Polyurethane Methacrylate Resin, Polyglycol Dimethacrylate, Hydroxyalkyl Methacrylate, Acrylic Acid, Saccharin, Tert-Butyl Perbenzoate, Cumene Hydroperoxide, Substituted Silane, Adhesion Promoter, Polyglycol Dimethacrylate, Methanol, Cumene (1)

Polyurethane Prepolymer, Dicyclohexylmethane-4, 4'-Diisocyanate (1)

Polyurethane Resin, P,P'-diphenylmethane Diisocyanate (MDI) (1)

Quartz (sio2), Calcium Carbonate, Neopentyl Glycol Diglycidyl Ether, Carbon Black (1)

Quartz (sio2), Glyceridic Oil, Zeolites, Carbon Black (1)

Silica, Amorphous, Treated, Silicone Resin, Silane Derivative, Photoinitiator, Substituted Silane (1)

Silicone Resin, Silica, Amorphous, Treated, Silane Derivative, Photoinitiator, Substituted Silane (1)

Substituted Polyo, Dimethyltindineodecanoate (1)

Talc, Iron, Epoxy Resin, Glass, Oxide, Chemicals, Polyether Polymercaptan, Substituted Aminophenol, Treated Fumed Silica, Quartz (sio2) (1)

Talc, Quartz , Substituted Piperazine, Alkyl Phenol, Diethylenetriamine, 4,4'-Isopropylidenediphenol, Treated Fumed Silica, Substituted Silane (2)

Treated Fumed Silica, Zeolites, Dibutyltin Di (2)

Triethylenetetramine, 4,4'-methylenebis(Cyclohexylamine) (1)

Zinc Sulfide, Talc, Epoxy Resin, Glass, Oxide, Chemicals (1)

Pour Point

Part D: 1711 deg C (1)

VOC Content

0.04% (1)

0.59% (2)

1 g/l (3)

10 g/l (8)

11 - 20 g/l (1)

12.8 g/L (1)

20.85 g/L (1)

20.85 g/l (1)

21.15 g/L (1)

21.15 g/l (2)

21.54 g/l (2)

3.9 g/l (4)

30 g/L (1)

35.5 g/l (2)

37.7 g/L (1)

4.9 - 772 g/l (1)

41.58 g/L (1)

5 g/l (8)

5.48 g/L (1)

5.62 g/l (1)

6 g/l (1)

6.78 g/l (2)

7 g/l (1)

7.84 g/L (1)

7.9 g/l (1)

8.6 g/l, 231 g/l (1)

< 0.05% (1)

< 0.23% (1)

< 0.4% (1)

< 1% (1)

< 10 g/L (36)

<0.23% (2)

<1% (15)

<10 g/l (5)

Part A: 0.13 g/L, Part B: 0.57 g/L (1)

Part A: 12.87 g/L, Part B: 3.04% (2)

Part A: 1243 g/L, Part B: 30 g/L (2)

Part A: 18.4 g/L, Part B: 645.1 g/L (1)

Part A: 266 g/L, Part B: 241 g/L (1)

Part A: 55.6 g/L, Part B: 138 g/L (1)

Part A: < 10 g/L, Part B: > 93 deg C (1)

Part A: <1%, Part B: <3% (2)

Part A: <10 g/L, Part C: 432 g/L (1)

Part B: 3 g/L (1)

Tensile Strength

1300 psi (4)

1500 psi (3)

1740 - 3190 psi (1)

183000 psi (1)

1900 psi (3)

2000 psi (1)

2150 psi (2)

2250 psi (1)

2500 psi (5)

2600 psi (4)

270 psi (2)

2700 psi (2)

2750 psi (1)

2761 psi (2)

3000 psi (2)

3080 psi (1)

3100 psi (1)

3210 psi (3)

3300 psi (4)

3335 psi (2)

3500 psi (3)

3800 psi (1)

3830 psi (2)

3960 psi (2)

4210 psi (1)

4220 psi (1)

4290 psi (1)

4400 psi (1)

4530 psi (2)

4720 psi (1)

4900 psi (4)

5100 psi (2)

5300 psi (2)

5450 psi (1)

5500 psi (3)

5700 psi (4)

5900 psi (4)

5910 psi (1)

600 psi (1)

6800 psi (3)

7240 psi (1)

8000 psi (4)

87 psi (1)

900 psi (1)

Curing Time

1 hr (1)

10 min (1)

12 hr (2)

12 hr at 72 deg F (1)

14 Days (1)

15 - 24 hr (2)

16 hr (3)

168 hr (1)

2 hr at 350 deg F (1)

24 - 48 hr at 72 deg F (2)

24 hr (76)

24 hr at 72 deg F (8)

24 hrs (1)

30 Sec (1)

30 min (1)

4 hr (1)

4 hrs (1)

48 hr (1)

48 hr at 72 deg F (9)

5 days (1)

5 to 7 min (2)

6 - 24 hr (2)

6 hr (4)

60 min (1)

7 Days at 72 deg F (17)

7 days (1)

7 hr (1)

72 hr (2)

8 - 24 hr (1)

90 min (2)

Working Time

60 sec (1)

Viscosity Rating

100 to 150 sec (2)

1000 - 5000 cPs (1)

1000 cPs (3)

10000 - 30000 cPs (1)

10000 - 40000 cPs (1)

10000 - 40000 cPs Base, 15000 - 55000 cPs Accelerator (1)

10000 cPs (4)

100000 cPs (5)

11000 cPs (3)

120 cPs (1)

12000 cPs (3)

13400 cPs (1)

14500 cPs (1)

15000 - 40000 cPs (1)

15000 cPs (5)

150000 cPs (1)

160000 - 260000 cPs (1)

2000 - 4000 cPs (1)

20000 - 50000 cPs Base, 8000-14000 cPs Accelerator (1)

20000 cPs (2)

200000 cPs (1)

2250 cPs (1)

2500 cPs (2)

25000 cP (1)

30000 cPs (10)

37000 cPs (1)

38000 cPs (1)

40000 - 80000 cPs (2)

40000 cPs (1)

400000 cPs (1)

450 cPs (1)

50000 cPs (1)

52500 cPs (3)

5315 cPs (1)

5500 cPs (1)

55000 cPs (1)

6000 cPs (1)

60000 cPs (2)

6500 cPs (3)

67500 cPs (1)

70000 cPs (3)

75000 - 150000 cPs (1)

75000 cPs (1)

8000 - 14000 cPs (1)

8000 cPs (3)

80000 cPs (8)

9000 cPs (1)

95000 cPs (1)

Part A: 10500 cPA, Part B: 2200 cPA (2)

Part A: 160000 cPs, Part B: 40000 cPs (2)

Part A: 20000 to 25000 cPs; Part B: 50000 to 80000 cPs (1)

Part A: 225000 cPA, Part B: 175000 cPA (1)

Part A: 235000 cPA, Part B: 710000 cPA (1)

Part A: 300000 cPA, Part B: 40 cPA (2)

Part A: 325000 cPA, Part B: 30000 cPA (1)

Part A: 375000 cPA, Part B: 2800 cPA (2)

Part A: 4000 - 11000, Part B: 40000 - 80000 cPs (1)

Part A: 41500 cPA, Part B: 2800 cPA (1)

Part A: 640 cPA, Part B: 35000 cPA (1)

Part A: 65000 cPA, Part B: 7000 cPA (1)

Part A: 67500 cPA, Part B: 7000 cPA (2)

Part A: 71500 cPA, Part B: 19000 cPA (1)

Part A: 75000 cPA, Part B: 65500 cPA (1)

Part A: 82500 cPA, Part B: 52500 cPA (1)

Part A: 9300 cPA, Part B: 2700 cPA (1)

Shear Strength

11000 psi (1)

1200 psi (1)

1250 psi (1)

1430 psi (2)

1460 psi (2)

15 - 60 psi (1)

1500 psi (5)

1600 psi (4)

1658 psi (1)

1675 psi (1)

1800 - 4180 psi (1)

2000 psi (8)

2160 psi (3)

2175 - 4350 psi (1)

2200 psi (3)

22000 psi (2)

2480 psi (2)

2490 psi (3)

2500 psi (12)

2600 psi (1)

2630 psi (3)

2675 psi (1)

2700 psi (3)

2790 psi (2)

2800 - 4180 psi (2)

2800 psi (2)

2820 psi (1)

3000 psi (3)

3100 psi (3)

3200 psi (4)

3270 psi (3)

3380 psi (1)

3500 psi (3)

3695 psi (1)

400 psi (1)

4100 psi (1)

4180 psi (1)

4230 psi (2)

4300 psi (6)

4320 psi (2)

4500 psi (8)

4650 psi (1)

500 psi (1)

640 psi (3)

810 psi (2)

930 psi (4)

Drying Time

15 min Air, 10 min Force (19)

4 - 6 hr (2)

5 to 7 min (2)

Setting Time

1 - 4 min (1)

10 - 15 min (1)

10 hr (8)

10 min (3)

15 min (6)

160 min (1)

2 hr (5)

2.5 hr (6)

20 min (6)

3 hr (13)

3 min (1)

3.5 hr (1)

30 min (2)

4 hr (5)

5 - 10 min (1)

5 min (2)

6 - 8 min (1)

6 hr (1)

60 Sec (4)

61 sec (1)

8 hr (3)

90 Sec (1)

< 15 min (1)

BC221704

Scotch-Weld™ 1838 Part B/A Two-Part Epoxy Adhesive, 2 oz Kit, Paste, Green, 1.37

Compare

BC199966

Scotch-Weld™ DP460 Two-Part Epoxy Adhesive, 37 ml Cartridge, Liquid, Off-White, 1.12

Compare

BC199982

Scotch-Weld™ 051135-08101 Two-Part Urethane Adhesive, 2 oz Kit, Paste, Brown/White, 1.34

Compare

BC200075

3M™ 05895 2-Part EZ Sand Flexible Parts Repair Kit, 5 fl-oz Tube, Paste, Off-White, 1.078 to 1.09

Compare

BC259722

Scotch-Weld™ 2216 High Performance Part B/A Two-Part Epoxy Adhesive, 1 pt Kit, Liquid, Gray, 1.17

Compare

BC261045

Loctite® 29290 Two-Part Epoxy Adhesive, 200 ml Cartridge, Liquid, Clear, 1.15

Compare

BC261051

Loctite® 29301 Low Viscosity Two-Part Epoxy Adhesive, 400 ml Dual Cartridge, Liquid, Clear, 1.12

Compare

BC261052

Loctite® 29304 General Purpose Two-Part Epoxy Adhesive, 50 ml Dual Cartridge, Liquid, Gray, 1.2

Compare

BC261053

Loctite® 29305 General Purpose Two-Part Epoxy Adhesive, 200 ml Dual Cartridge, Liquid, Gray, 1.2

Compare

BC261050

Loctite® 29299 Low Viscosity Two-Part Epoxy Adhesive, 50 ml Cartridge, Liquid, Clear, 1.12

Compare

BC261049

Loctite® 29296 2-Part Non-Sag Structural Adhesive, 400 mL Dual Cartridge, Liquid, Part A: 1.17, Part B: 1.12

Compare

BC261046

Loctite® 29291 2-Part Fast Cure Structural Adhesive, 400 mL Dual Cartridge, Liquid, Part A: 1.15, Part B: 0.98

Compare

BC261047

Loctite® 29294 Fast Set Non-Sag Two-Part Epoxy Adhesive, 50 ml Dual Cartridge, Liquid, Clear, 1.17

Compare

BC261048

Loctite® 29295 2-Part Non-Sag Structural Adhesive, 200 mL Dual Cartridge, Liquid, Part A: 1.17, Part B: 1.12

Compare

BC199965

Scotch-Weld™ DP605NS Two-Part Urethane Adhesive, 50 ml Dual Cartridge, Liquid, Off-White, 1.14

Compare

BC199964

Scotch-Weld™ DP110 Two-Part Epoxy Adhesive, 50 ml Cartridge, Liquid, Translucent, 1.1

Compare

BC103549

ITW Devcon® Floor Patch 13100 10 lb. Can Epoxy, 1/Case

Compare

BC110851

Scotch-Weld™ DP190 Two-Part Epoxy Adhesive, 50 ml Cartridge, Liquid, Gray, 1.32

Compare

BC111309

Scotch-Weld™ 2216 High Performance Part B/A Two-Part Epoxy Adhesive, 2 fl-oz Kit, Liquid, Gray, 1.17

Compare

BC084629

ITW Devcon® 5 Minute® 14270 50mL Cartridge Fast Cure Low Viscosity Epoxy, 12/Case

Compare

BC072345

ITW Devcon® Plastic Welder 14300 25mL Tube Fast Cure Non-Sag Structural Adhesive, 24/Case

Compare

BC004810

ITW Devcon® 5 Minute® 14210 2.5 oz. Tube Fast Cure Low Viscosity Epoxy, 24/Case

Compare

BC004917

Devcon 5 minute® 14240 Epoxy Gel, 25mL Dual Syringe Tube, Opaque/Amber, Paste

Compare

BC052202

ITW Devcon® S-208 1 oz. Cartridge Epoxy Glue

Compare

BC134575

ITW Devcon® 2 Ton® 14310 25mL Tube Epoxy Adhesive

Compare

BC135770

Oatey® Fix-It 31270 4 oz. Stick Epoxy putty

Compare

BC199726

Scotch-Weld™ DP100NS Two-Part Epoxy Adhesive, 50 ml Kit, Liquid, Translucent, 1.15

Compare

BC199940

Scotch-Weld™ DP270 Non-Corrosive Two-Part Epoxy Potting Compound/Adhesive, 50 ml Cartridge, Liquid, Black, 1

Compare

BC199963

Scotch-Weld™ DP420 Part B/A Two-Part Epoxy Adhesive, 37 ml Cartridge, Liquid, Off-White, 1.13

Compare

BC199722

Scotch-Weld™ DP270 Non-Corrosive Two-Part Epoxy Potting Compound/Adhesive, 50 ml Cartridge, Liquid, Clear, 1.15

Compare

BC199632

Scotch-Weld™ 460 Part A Two-Part Epoxy Adhesive, 5 gal Pail, Liquid, Off-White, 1.08

Compare

BC167252

Scotch-Weld™ DP100 Part B/A Two-Part Epoxy Adhesive, 50 ml Duo-Pak Cartridge, Liquid, Clear, 1.17

Compare

BC185921

Scotch-Weld™ DP110 Part B/A Two-Part Epoxy Adhesive, 50 ml Cartridge, Liquid, Gray, 1.14

Compare

BC199519

Scotch-Weld™ 460 Part B/A Two-Part Epoxy Adhesive, 1 qt Kit, Paste, Off-White, 1.12

Compare

BC261054

Loctite® 29306 2-Part General Purpose High Performance Structural Adhesive, 400 mL Dual Cartridge, Liquid

Compare

BC261057

Loctite® 29314 High Strength Two-Part Epoxy Adhesive, 50 ml Dual Cartridge, Liquid, Off-White, 1.1

Compare

BC261165

Loctite® 33290 High Temperature Structural Adhesive, 1 L Bottle, Liquid, Opaque/Light Yellow to Dark Amber, 1.0113

Compare

BC261169

Loctite® 33403 1-Part General Purpose High Performance Structural Adhesive, 25 mL Syringe, Liquid, Yellow, 1.0623

Compare

BC261171

Loctite® Fixmaster® 33510 3-Part Pourable Super Grout, 5 gal Kit, Part A: Liquid, Part B: Liquid, Part C: Powder

Compare

BC261164

Loctite® 33275 Severe Environment Structural Adhesive, 300 ml Cartridge, Liquid, Light Yellow/Dark Amber, 1.0113

Compare

BC261162

Loctite® 33201 Severe Environment Structural Adhesive, 25 ml Syringe, Liquid, Amber, 1.0113

Compare

BC261142

Loctite® 32490 High Impact One-Part Structural Adhesive, 1 l Bottle, Liquid, Amber, 1.1

Compare

BC261158

Loctite® 32586 High Temperature High Performance Structural Adhesive, 1 L Bottle, Liquid, Light Yellow, 1.1

Compare

BC261159

Loctite® 32685 Fast Fixture One-Part Structural Adhesive, 1 l Bottle, Liquid, Amber, 1.1

Compare

BC261191

Loctite® 39250 General Purpose High Performance Structural Adhesive, 50 mL Tube, Liquid, Beige/Dark Amber, 1.16

Compare

BC261192

Loctite® 39275 Magnet Bonder One-Part Structural Adhesive, 300 ml Cartridge, Liquid, Amber, 1.16

Compare

BC261283

Loctite® 39950 Epoxy Resin, 1 gal Can, Viscous/Liquid, Black, 2.4

Compare

BC261288

Loctite® 39960 Fast Cure High Strength Epoxy Hardener, 1 qt Can, Liquid, Amber, 1

Compare

BC261291

Loctite® 39964 1-Part High Strength Epoxy Hardener, 1 qt Can, Liquid, Amber, 0.95

Compare

BC261281

Loctite® 39947 General Purpose High Temperature Epoxy Resin, 1 gal Can, Liquid, Black, 1.6

Compare

BC004767

ITW Devcon® 5 Minute® 14200 15 oz. Cartridge Fast Cure Low Viscosity Epoxy, 6/Case

Compare

BC261193

Loctite® 39280 Magnet Bonder One-Part Structural Adhesive, 1 l Bottle, Liquid, Amber, 1.16

Compare

BC261194

Loctite® 39395 Epoxy Hardener, 1 qt Can, Liquid, Amber, 1

Compare

BC261195

Loctite® 39398 Polyurethane Hardener, 1 gal Pail, Liquid, White, 1.5

Compare

BC261141

Loctite® 32430 High Impact Structural Adhesive, 50 ml Bottle, Liquid, Amber, 1.1

Compare

BC261109

Loctite® 31231 1-Part General Purpose Ultra Fast Cure Structural Adhesive, 50 mL Bottle, Liquid, Amber/Clear, 1.08

Compare

BC261064

Loctite® 29326 Extended Work Life General Purpose Two-Part Epoxy Adhesive, 400 ml Dual Cartridge, Liquid, Black, 1.1

Compare

BC261065

Loctite® 29329 Chemical Resistant Impact Resistant Low Viscosity Epoxy Adhesive, 50 ml Dual Cartridge, Liquid, Clear

Compare

BC261066

Loctite® 29330 2-Part High Performance Structural Adhesive, 200 mL Dual Cartridge, Liquid

Compare

BC261063

Loctite® 29325 Extended Work Life General Purpose Two-Part Epoxy Adhesive, 200 ml Dual Cartridge, Liquid, Black, 1.1

Compare

BC261062

Loctite® 29321 2-Part High Performance Structural Adhesive, 400 mL Dual Cartridge, Liquid, 1.1

Compare

BC261058

Loctite® 29315 2-Part High Performance Structural Adhesive, 200 mL Dual Cartridge, Liquid, Part A: 1.1, Part B: 1.15

Compare

BC261059

Loctite® 29316 High Strength Two-Part Epoxy Adhesive, 400 ml Dual Cartridge, Liquid, Off-White, 1.1

Compare

BC261060

Loctite® 29319 2-Part High Performance Structural Adhesive, 50 mL Dual Cartridge, Liquid, 1.1

Compare

BC261067

Loctite® 29331 2-Part High Performance Structural Adhesive, 400 mL Dual Cartridge, Liquid

Compare

BC261068

Loctite® 29334 Non-Sag Two-Part Epoxy Adhesive, 50 ml Dual Cartridge, Liquid, Light Tan, 1.47

Compare

BC261078

Loctite® 29355 High Performance High Temperature Non-Sag Epoxy Adhesive, 400 ml Dual Cartridge, Liquid, Amber, 1.1

Compare

BC261103

Loctite® 30676 2-Part Urethane Adhesive, 50 mL Dual Cartridge, Liquid, Part A: Yellow, Part B: Translucent

Compare

BC261105

Loctite® 30680 2-Part Non-Sag Epoxy Adhesive, 50 mL Dual Cartridge, Liquid, Part A: 1.1, Part B: 1

Compare

BC261077

Loctite® 29354 2-Part High Temperature Ultra Strength Structural Adhesive, 200 mL Dual Cartridge, Liquid, 1 - 1.2

Compare

BC261076

Loctite® 29353 High Performance High Temperature Non-Sag Epoxy Adhesive, 50 ml Dual Cartridge, Liquid, Amber, 1.1

Compare

BC261069

Loctite® 29336 Non-Sag Two-Part Epoxy Adhesive, 400 ml Dual Cartridge, Liquid, Light Tan, 1.47

Compare

BC261074

Loctite® 29348 High Strength Two-Part Urethane Structural Adhesive, 50 ml Dual Cartridge, Liquid, Off-White, 1.1

Compare

BC261075

Loctite® 29350 High Strength Two-Part Urethane Structural Adhesive, 400 ml Dual Cartridge, Liquid, Off-White, 1.1

Compare

BC261318

Loctite® 39995 Fast Cure Polyurethane Hardener, 1 gal Pail, Liquid, Black, 1.6

Compare

<< Prev Page of 2

Epoxy Bond

Epoxy Bond

Interbranch trucks run daily

Over 100 full-time employees

Over 33,000 items stocked

Resources