Starrett® 581 Precision Grinding Vise With T-Handle Wrench, 4 x 1-1/4 in Capacity, Hardened Steel
Item #BC063773
Starrett® Precision Grinding Vise, 4 x 1-1/4 in Capacity, Hardened Steel
- Four drilled and counterbored holes for 5/16 bolts in the base of the vise for bolting to a sine plate or the bed of a machine tool
- 1/4-20 in tapped hole in provided in each side of the solid jaw to allow the use of a stop for repetitive operations
- Ground flat, square and parallel within 0.0002 in
- T-handle wrench is provided for tightening the movable jaw
- Jaw pressure on workpiece is forward and downward for repeatable positioning and maximum holding power
- The movable jaw is slightly narrower than the base, enabling the vise to be used on its side
- For attaching special jaw plates, two holes are drilled in both the solid and movable jaws