Milwaukee® 4206-1 Adjustable Position Heavy Duty Electromagnetic Drill Press, 2 hp, 120 VAC, 3/4 in Chuck, 4-11/16 in
Milwaukee® Electromagnetic Drill Press, Adjustable Position, Heavy Duty, 3/4 in Chuck, 11 in Spindle Travel, 350 rpm Spindle Speed, 1 Spindle Speed, 1630/1670 lb Drill Point Pressure, 4-11/16 in Drill to Center From Base, 25-1/4 in Overall Height, 2 hp, 120 VAC, 12.5 A
- No job is too large for this heavy duty drill press. The adjustable position Electromagnetic drill press with 3/4 in motor features the 4203 adjustable position, variable speed base and the 4262-1 3/4-in drill motor with 3-jaw chuck. Built for production drilling, this 11.5 amp drill press can handle the toughest drilling jobs with up to a 3/4 in twist drill hole capacity, 4 in hole capacity with steel Hawg® cutters and 1-14 tapping capacity. The motor runs at 350 no-load rpm, geared low for maximum torque; base control panel offers variable speed control of motor rpm. It can produce up to 1670 pounds of drill point pressure with a 1 in steel plate. Feedback speed control helps you maintain speed during operation. This unit features a 3/4 in chuck for fast and easy bit changes while eliminating slippage and breakage. The dual mount gear case with reverse mount permits tight quarter drilling.
- Powerful 11.5 A motor, engineered for the toughest applications
- Dual mount gear case with reverse mount permits tight quarter drilling
- 3/4 in tap capacity, taps up to 1 in, 14 threaded holes
- Maximum force, develops up to 1670 lb of drill point pressure with a 1 in steel plate
- Solid state electronic switching, offers faster, smoother and quieter switching for a longer product lifespan
- Line lockout, prevents tool from operating if voltage is restored to an interrupted line
- Forward/reverse electronic feedback speed control, soft start and 6 ft safety chain
- 9 ft fixed cord
- Red/grey/black finish