Ridgid® 26092 1224 Pipe Threading Machine, 1/4 - 4" Pipe, 1/4 - 2" Rod Capacity, 15A, 50/60 Hz, 120V, 12/36 RPM, With 711/714 1/2 - 4"
Ridgid® 1224 Pipe Threading Machine, 15A, Capacity: 1/4 to 4" Pipe, 1/4 to 2" Rod, 711/714 Die Head, Chuck: Hammer-Type with Replaceable Rocker-Action Jaw Inserts, Gear Box: 3:1 Ratio Two Speed, 1-1/2 HP, Hz: 50/60, Includes: (1) 714 (914) 2-1/2 to 4" Receding Self Opening Die Head, (1) 711 (911) 1/4 to 2" Universal Self Opening Die Head, (1) 1/2 to 3/4" Universal Alloy Die Set, (1) 1 to 2" Universal Alloy Die Set, (1) 2-1/2 to 4" 1224 High Speed Die Set, (1) Gallon Nu-Clear Oil, (3) Hex Keys, (1) Spare F-229 Cutter Wheel, 1-3/4" Combination Wrench, (1) Tool Box, (1) 744 Reamer, (1) 764 Cutter, Motor Type: Induction, 12/36 No Load, 18-1/2" Overall Length, 72-1/2" Overall Width, 1 Phase, Pump: Self-Priming Constant Flow Gerotor, Standards: CSA Certified, Switch Type: Reverse Off, Forward Rotary and Integral Foot, Voltage Rating: 120V
- Shown on optional No. 200A stand
- Threads 1/4 - 2" pipe at 36 rpm and 2 1/2 - 4" at 12 rpm
- The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C
- An induction motor helps insure sound levels well within the limits set by the regulating authorities
- A special capacitor-start/capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced
- 1/4 to 2" universal die head, 2-1/2 to 4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads
- Constant and proper lubrication of dies and workpiece with through-head oiling
- Reverse/off/forward, heavy-duty rotary-type and integral foot switch motor control
- Two-speed gear box 3:1 ratio
- Hammer type with replaceable rocker-action jaw insert chuck
- Self priming, GEROTO type, automatic reversing, constant flow pump
- Cam-action rear centering device, self-contained through the head oil system