Ridgid® 23717 Sectional Drain Cleaning Machine, For 2 to 8" Drain Lines
Item #BC242469

Ridgid® Sectional Drain Cleaning Machine, Sectional Drain Cleaning Machine Item, For Indoor and Outdoor Jobsites, Drain Line Inside Diameter: 2 to 8", 3/4 HP, Includes: 7 Sections of (2W354) 1-1/4 In x 15 ft. Sectional Cable (For Total of 105 ft.), (1VUZ8) Left Leather Mitt with Steel Studs, (1VXC3) Straight Auger, (1VXD9) Funnel Auger, (1VXE2) Funnel Retrieving Auger, (1VXC2) 2-1/2" Sawtooth Cutter, (1VXG4) 3" Sharktooth Cutter, (1VXE4) 2-1/2" Grease Cutter, 2 Hex Keys, 12 ft. Rear Guide Hose, Coupling Pin Key, 2 Cable Carriers, Tool Box, 200 ft. Maximum Run, Standards: CSA Certified LR13710, Motor: Universal, 115 VAC, Single Phase, 2A, 50-60 Hz, Variable Speed, Reversing, 710 rpm Operating Speed, Power Cord: 15 ft.
  • The finest all around sewer and drain cleaning machine. One man can easily clean the heaviest blockages indoors or out. High speed cleaning gets the job done faster better
  • Wheels to the job site - sets up fast, cleans up fast
  • Low-profile "B" frame design will fit most crawl spaces, loads and unloads from truck easily. Upright "A" frame features cable carrier storage during transport, ideal for in-house applications
  • Equipped to run, easy to handle, 15 ft. sections of 1 1/4" cable to clean 3" to 8" (32m to 200mm) lines to 200 ft. (61m)
  • Easy clutch jaw change out adapts K-1500 to run 15 ft. sections of 7/8" (4.6/22mm) cable through 2" to 4" lines up to 175 ft. (50 to 100mm, 53m)
  • Machine with A-1 mitt, A-12 pin key, and A-34-12 rear guide hose, plus: seven sections 1-1/4" (C-11) cable, total 105 ft., two A-8 cable carriers, nine-piece 1-1/4" tool set
  • GFI protected
BrandRidgid®
ItemSectional Drain Cleaning Machine
ApplicationFor Indoor and Outdoor Jobsites
Drain Line Inside Diameter2 to 8"
HP3/4
Includes7 Sections of (2W354) 1-1/4 In x 15 ft. Sectional Cable (For Total of 105 ft.), (1VUZ8) Left Leather Mitt with Steel Studs, (1VXC3) Straight Auger, (1VXD9) Funnel Auger, (1VXE2) Funnel Retrieving Auger, (1VXC2) 2-1/2" Sawtooth Cutter, (1VXG4) 3" Sharktooth Cutter, (1VXE4) 2-1/2" Grease Cutter, 2 Hex Keys, 12 ft. Rear Guide Hose, Coupling Pin Key, 2 Cable Carriers, Tool Box
Maximum Run200 ft.
StandardsCSA Certified LR13710
MotorUniversal, 115 VAC, Single Phase, 2A, 50-60 Hz, Variable Speed, Reversing
Operating Speed710 rpm
Power Cord15 ft.