Royal 10684 High Speed Precision Live Center, Taper Shank, 4 MT Taper, 525 lb Maximum Workpiece, 1905 lb Load
Item #BC248861

Royal Live Center, High Speed Precision, Taper Shank, 4 MT Taper, 525 lb Maximum Workpiece Weight, Long Point, 1-1/4 in Point Dia, 2.35 in Point Length, 1905 lb, 2.45 in Head Dia, 2.78 in Head Length, 9-5/8 in Overall Length, 12000 rpm Maximum, 60 deg Included Angle, Triple Bearing, Steel, +/- 0.000050 in TIR Accuracy
  • The Royal high speed precision live center is a true high speed live center with up to 12000 rpm
  • The royal high speed precision live center is lubricated with lightweight spindle oil instead of grease for reduced turning resistance and lower operating temperatures
  • The extended point of the Royal high speed precision live center, available in both steel and carbide tipped versions, has been optimized to provide high rigidity and outstanding tool clearance
  • The Royal high speed precision live center is extremely accurate, with runout guaranteed to +/- 0.00005 in TIR or better
  • Bearing life is significantly extended with the exclusive royal roto-shield coolant slinger and upgraded, long life, spring loaded seal that is resistant to abrasion, high temperatures and virtually all metalworking fluids
  • This live center model incorporates three precision angular contact bearings that are secured to the point with a locknut to form a rigid preloaded assembly, this design is similar to a machine tool spindle cartridge and provides outstanding accuracy and rigidity
  • The point of the Royal high speed precision live center extends into the center's body where it is supported by a needle roller bearing, this further increases rigidity, reduces point deflection and dampens vibration
  • The low profile head of the Royal high speed precision live center offers exceptional tool clearance
  • Both the point and body of this live center model are hardened and ground for strength and extended operating life
  • Made with Roto-Shield™ technology
Accuracy+/- 0.000050 in TIR
Bearing TypeTriple
Head Diameter2.45 in
Head Length2.78 in
Included Angle60 deg
Load Capacity1905 lb
MaterialSteel
Maximum Speed12000 rpm
Maximum Workpiece Weight525 lb
Overall Length9-5/8 in
Point Diameter1-1/4 in
Point Length2.35 in
Point TypeLong
Shank TypeTaper
Taper Size4 MT
TypeHigh Speed Precision