Loctite® Nordbak® 98382 2-Part Pneu-Wear, 25 lb, Part A: Liquid, Part B: Paste, Part A: Dark Gray, Part B: Tan, 9 sq-ft
Loctite® Nordbak® Pneu-Wear, 2-Part, Series: PC 7317™, 25 lb, Kit, Part A: Liquid, Part B: Paste, Part A: Dark Gray, Part B: Tan, 9 sq-ft Coverage, Chemical Composition: Part A: Fibrous Aluminum Oxide, Epoxy Resin, Silicon Carbide, Silicon Dioxide, Magnesium Oxide, Treated Fumed Silica, Neopentyl Glycol Diglycidyl Ether, Titanium Dioxide, Substituted Silane; Part B: Fibrous Aluminum Oxide, Silicon Carbide, Diethylenetriamine, 4,4'-Isopropylidenediphenol, Amine Adduct, Amine Reacted Fatty Acid, Calcium Carbonate, Silicon Dioxide, Manganese Dioxide, Triethylenetetramine, Silane Derivative, Aliphatic Amine, 6 hr Curing, 250 deg F, < 10 g/L VOC, Part A: Epoxy, Part B: Ammoniacal
- Recommended for rebuilding, repairing and protecting high wear areas under typical dry service temperatures
- Trowelable
- Filled with small ceramic beads and silicon carbide for maximum protection against fine particle abrasion
- 4:1 mix ratio by volume/by weight
- 30 min work life time
- 15000 psi compressive strength
- D 85 shore hardness
- > 199.4 deg F flash point of part A and 399.2 deg F flash point of part B
- 1.537 specific gravity od part B
- Part A: epoxy resin; part B: epoxy hardener