JET® 354169 Belt Drive Floor Drill Press, 3/4 hp, 115/230 V, 5/8 in Chuck, 16-1/2 in Swing, 13-3/4 in Table
Item #BC295472

JET® Floor Drill Press, Belt Drive, 5/8 in Chuck, 16-1/2 in Swing, MT-2 Spindle Taper, 4-3/8 in Spindle Travel, 200 - 3630 rpm Spindle Speed, 16 Spindle Speed, 29-1/8 in Spindle to Table Distance, 8-1/4 in Spindle to Column Distance, 13-3/4 in Table, 19.63 lb Table Load, 45 deg Table Tilt, 11-1/8 x 19-5/8 in Base, 3-1/8 in Column Dia, 3/4 hp, 115/230 V, 9/4.5 A, 12-3/4 in L x 23-1/2 in W x 54-1/2 in H
  • Floor drill presses, also known as standing drill presses, offer more power options than bench drill presses, they are most suited for heavy duty operations
  • Drill presses are used for several for countersinking, counter boring, drilling, reaming and tapping operations, they are either mounted to a workbench or secured to the floor
  • Step pulleys are driven by a belt system that is manually changed to achieve a range of fixed speeds
  • Single phase refers to one phase line (coil) that connects to and runs voltage through the motor, single phase lines are not as efficient as three phase motors
TypeBelt Drive
Table Size13-3/4 in
Horsepower3/4 hp
Spindle TaperMT-2
Table Tilt45 deg
Spindle Speed200 - 3630 rpm
Voltage Rating115/230 V
Chuck Size5/8 in
Spindle to Table Distance29-1/8 in
Base Dimensions11-1/8 x 19-5/8 in
Column Diameter3-1/8 in
Amperage Rating9/4.5 A
Table Load Capacity19.63 lb
Swing16-1/2 in
Spindle Travel4-3/8 in
Number of Spindle Speeds16
Spindle to Column Distance8-1/4 in
Dimensions12-3/4 in L x 23-1/2 in W x 54-1/2 in H
IncludesChuck and Key