JET® 414474 Variable Speed Pulley Horizontal Miter Band Saw, 135 in L x 1 in W x 0.035 in THK Blade, 1-1/2 hp (Bare Tool)
JET® Horizontal Miter Band Saw, Variable Speed Pulley, Cutting Capacity: 10 x 16 in, 10 in Round at 90 deg, 8-1/2 in Round at 45 deg, 10 x 14 in and 2 x 16 in Rectangle at 90 deg, 8-1/2 x 9 in Rectangle at 45 deg, 135 in L x 1 in W x 0.035 in THK Blade, 100 - 350 sfpm, 45 deg Vise, 45 deg Head Cutting Angle, 1-1/2 hp, 115/230 V, 1 Phase, 60 Hz, 18/9 A, Manual Control, 76 in L x 30 in W x 48 in H
- Mitering head swivels to cut any angle 0 to 45 deg while the work piece remains secured
- Swing away control panel houses major saw controls
- Variable speed drive system allows the operator to easily fine tune the blade speed
- Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
- The blade rides on two load bearings mounted on a pivot shaft with the side bearings and carbide pads assisting in distributing the load equally
- Down feed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
- Heavy duty transmission utilizes hardened and ground gears operating in an oil bath
- Cast iron blade wheels
- 25-1/2 in bed height