Scotch-Brite™ 048011-01708 Convolute Deburring Wheel, 8 in Dia x 2 in THK, 3 in, Silicon Carbide Abrasive
Item #BC344580
Scotch-Brite™ Deburring Wheel, Convolute, Series: SST, 8 in Dia, 2 in Thickness, 3 in, 8S Fine, Silicon Carbide Abrasive, 4500 rpm Maximum
- Our Scotch-Brite™ SST Deburring Wheel is strong enough to easily remove burrs and radius edges resulting from drilling, stamping, punching and other machining operations, while not disturbing critical tolerances. It is used extensively in the aerospace industry for deburring and finishing turbine blades and vanes, polishing and blending surgical instruments, and deburring aluminum die cast flashing, among other uses. Typically used on stationary machinery, these wheels are available in diameters 4 inches and greater and widths up to 36 inches. SST wheels use fine grade silicon carbide or aluminum oxide abrasives. Silicon carbide is sharp, hard synthetic abrasive, a good match for cutting hard materials. Aluminum oxide is a hard, blocky mineral with a high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
- Convolutely wound on a core
- Hard, long lasting 8 density
- Gray color