Milwaukee® 4209-1 Adjustable Position Heavy Duty Electromagnetic Drill Press, 2 hp, 120 VAC, 1-1/4 in Chuck, 5-3/32 in
Milwaukee® Electromagnetic Drill Press, Adjustable Position, Heavy Duty, 1-1/4 in Chuck, NO 3 Morse Spindle Taper, 11 in Spindle Travel, 750/375 rpm Spindle Speed, 1 Spindle Speed, 1530/1600 lb Drill Point Pressure, 5-3/32 in Drill to Center From Base, 25-1/4 in Overall Height, 2 hp, 120 VAC, 12.5 A, 21 in L x 7 in W
- No job is too large for this heavy duty drill press. This unit features the 4203 adjustable position, variable speed base and the 4292-1 1-1/4-in drill motor. Built for production drilling, this 11.5 amp drill press can handle the toughest drilling jobs with up to a 1-1/4 in threaded hole capacity. The 2-speed motor runs at 375 and 750 rpm, geared low for maximum torque. It can produce up to 1600 pounds of drill point pressure with a 1-inch steel plate. Feedback speed control helps you maintain speed during operation. This unit features a no. 3 morse taper chuck, for fast and easy bit changes while eliminating slippage and breakage. The dual mount gear case with reverse mount permits tight quarter drilling.
- Powerful 11.5 A motor, engineered for the toughest applications
- Dual mount gear case with reverse mount permits tight quarter drilling
- 1-1/4 in tap capacity, taps up to 1 in, 14 threaded holes
- Maximum force, develops up to 1600 lb of drill point pressure with a 1 in steel plate
- Solid state electronic switching, offers faster, smoother and quieter switching for a longer product lifespan
- Line lockout, prevents tool from operating if voltage is restored to an interrupted line
- Forward/reverse electronic feedback speed control, soft start and 6 ft safety chain
- 9 ft fixed cord
- Red/grey/black finish