JET® 320033 Radial Arm Floor Drill Press, 3 hp, 230/460 V, 3 in Swing, 23-5/8 x 17-1/2 x 15 in Table
JET® Floor Drill Press, Radial Arm, 3 in Swing, MT-4 Spindle Taper, 8-21/32 in Spindle Travel, 88 - 1500 rpm Spindle Speed, 6 Spindle Speed, 9-5/8 - 41-3/8 in Spindle to Table Distance, 8-5/8 - 29-1/2 in Spindle to Column Distance, 23-5/8 x 17-1/2 x 15 in Table, 49-5/8 x 25-3/16 x 6-1/4 in Base, 8-1/4 in Column Dia, 3 hp, 230/460 V, 8.2/4.1 A, 64 in L x 32 in W x 85 in H
- The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel, giving extra strength and smoothness to high torque loads
- The spindle is made of finest case hardened steel, for extra strength and wear
- The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
- Build to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy
- Arm raising safety device prevents arm from dropping
- Counter balanced mechanism for spindle return
- 6 speeds/3 feed rates make exotic materials easier to drill, bore and tap
- Centralized control center
- Automatic tool ejector
- Independent arm electric clamping system, which locks and unlocks the head and column