JET® 354551 Spline Drive Floor Drill Press, 1 hp, 230/460 V, 1/2 in Chuck, 15 in Swing, 15 x 18 in Table
Item #BC405936

JET® Floor Drill Press, Spline Drive, 1/2 in Chuck, 15 in Swing, MT-2 Spindle Taper, 6 in Spindle Travel, 400 - 5000 rpm Spindle Speed, 25-3/4 in Spindle to Table Distance, 7-1/2 in Spindle to Column Distance, 15 x 18 in Table, 90 lb Table Load, 45 deg R and L Table Tilt, 20-7/16 x 14-3/16 in Base, 3 in Column Dia, 1 hp, 230/460 V, 6.2/3.1 A, 30 in L x 20 in W x 71 in H
  • Full bearing support on quill for maximum spindle stiffness
  • Hand wheel speed adjustment of 400 to 5000 rpm
  • Large 2-1/4 in quill for greater accuracy
  • 3 in column diameter for maximum head support
  • 6 in stroke for deep hole application
  • Accurate depth stop for precise hole depths
  • 1/2 in drill chuck and arbor included
  • Safety collar
  • Variable speed
TypeSpline Drive
Spindle to Table Distance25-3/4 in
Amperage Rating6.2/3.1 A
Spindle to Column Distance7-1/2 in
Spindle TaperMT-2
Spindle Travel6 in
Base Dimensions20-7/16 x 14-3/16 in
Table Tilt45 deg R and L
Column Diameter3 in
Voltage Rating230/460 V
Chuck Size1/2 in
Spindle Speed400 - 5000 rpm
Table Size15 x 18 in
Table Load Capacity90 lb
Horsepower1 hp
Dimensions30 in L x 20 in W x 71 in H
Swing15 in
Warranty2 Years
IncludesLED Readout