Williams® EB-28T Shoulder Pattern Eye Bolt, 1-1/2 in ID, 3/4-10, 3/4 in Shank, Forged Carbon Steel
Item #BC589892
Williams® Eye Bolt, Shoulder Pattern, 1-1/2 in Inside Dia, UNC, 3/4-10, 5-11/32 in Overall Length, 3/4 in Shank, 25000 lb Tensile, Forged Carbon Steel, 2A
- Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
- Each lot is tested and inspected to insure conformance to specifications
- Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially
- Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
- 1-5/16 in W shoulder
- 2 in L shank
- 11/16 in THK head cross-section
- A steel washer or spacer may be required for proper seating
- To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
- Tightness and seating must be checked after initial load