Williams® EB-30T Shoulder Pattern Eye Bolt, 1-13/16 in ID, NO 1-8, 1 in Shank, Forged Carbon Steel
Item #BC589894
Williams® Eye Bolt, Shoulder Pattern, 1-13/16 in Inside Dia, UNC, NO 1-8, 6-3/4 in Overall Length, 1 in Shank, 45000 lb Tensile, Forged Carbon Steel, 2A
- Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
- Each lot is tested and inspected to insure conformance to specifications
- Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially
- Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
- 1-5/8 in W shoulder
- 2-1/2 in L shank
- 7/8 in THK head cross-section
- A steel washer or spacer may be required for proper seating
- To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable
- Tightness and seating must be checked after initial load