Proto® JRR07526 SAE Retaining Ring, 3/4 in Drive, 1-13/16 in OAL, 1-5/8 in Dia Groove, 1.81 in Dia Hub, Steel, Red
Item #BC793802
Proto® Retaining Ring, SAE, For Use With: 3/4 in Drive Impact Sockets, 3/4 in Drive, 1-13/16 in OAL, 1-5/8 in Dia Groove, 1.81 in Dia Hub, Steel, Plastic Coated, Red, 1.812 in W x 0.187 in H
- Retaining rings are used to help secure sockets onto drive tools
- They are not intended to bear any load
- The rotational forces are between the drive tool and the socket
- The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
- Drive tool and socket should line up when in use and should not pinch the crush gauge
- Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other
- One-piece construction, no loose parts
- Part numbers are embossed on the rings near the point at which the pin and ring meet
- Pin is made of resin which allows the material to compress without breaking
- This action pinches the small fin or the crush gauge on these retaining rings