Rust-Oleum® V2183838 Rust Preventative Spray Paint, 15 oz. Aerosol Can, Light Machinery Gray, Gloss
Item #BC863450

Rust-Oleum® Rust Preventative Spray Paint, Net Weight: 15 oz., Aerosol Can, Solvent Base Type, Acrylic Enamel Resin, Light Machinery Gray, Gloss, 14 sq. ft. Coverage, Dry Time: 1 to 2 hr., Dry Time Recoat: 1 to 48 hr., Dry Time Tack Free: 10 to 20 min., Full Cure Time @ Temp: 70 to 80°F, VOC Content: <65%, Surface: Masonry, Metal, Wood, Steel, Concrete, Flash Point: -156°F, Specific Gravity: 0.824, Corrosion, Chipping, Cracking and Peeling Resistance, Application Temperature: 50 to 90°F, Dry Heat Resistance: 200°F Max, Exposure Conditions: Interior/Exterior, VOC and MIR Compliant, For Surface Preparation of all Surfaces to Remove all Dirt, Grease, Oil, Salt and Chemical Contaminants
  • Higher paint solids for excellent coverage and better gloss retention
  • Can be used on surfaces that reach temperatures up to 200°F
  • Superior resistance to chipping, cracking and peeling
  • Maximum corrosion protection
  • Liquefied petroleum gas, acetone, alkyd resin, n-butyl acetate, xylene, titanium dioxide, barium sulfate, ethylbenzene, propylene glycol monobutyl ether, solvent naphtha, light aromatic, toluene, modified alkyl
BrandRust-Oleum®
ItemRust Preventative Spray Paint
Net Weight15 oz.
Container TypeAerosol Can
Base TypeSolvent
Resin TypeAcrylic Enamel
ColorLight Machinery Gray
FinishGloss
Coverage14 sq. ft.
Dry Time1 to 2 hr.
Dry Time Recoat1 to 48 hr.
Dry Time Tack Free10 to 20 min.
Full Cure Time @ Temp70 to 80°F
VOC Content<65%
SurfaceMasonry, Metal, Wood, Steel, Concrete
Flash Point-156°F
Specific Gravity0.824
ResistanceCorrosion, Chipping, Cracking and Peeling
Application Temperature50 to 90°F
Dry Heat Resistance200°F Max
Exposure ConditionsInterior/Exterior
StandardsVOC and MIR Compliant
ApplicationFor Surface Preparation of all Surfaces to Remove all Dirt, Grease, Oil, Salt and Chemical Contaminants